Aug 30, 2022 • Filed to: Windows Computer Solutions • Proven solutions
"How to fix Windows 10 black screen after an update?" I performed an update on my Windows 10 OS, in the same way, I did before, but now my screen is not showing anything as it has turned black. What could have caused the issue, and how can I make the screen appear again without losing data on my PC?
Operating a computer is a tricky thing as you never know when a disaster would strike and disrupt your activities. Though the PC may be showing warnings before the ultimate calamity, they are still tough to spot. The windows 10 black screen after update is one such issue that could occur at any time. Nevertheless, all hope is not lost as there are solutions that could make the screen able to display content again in no time. So, continue reading this article as we will discuss all of such methods in this article for you.
- Reasons: Why is My Screen Black after Windows 10 Update?
- Windows 10 Black Screen after Update. How to Fix?
- Bonus Tips: Recover Data Lost During Windows 10 Update
It is necessary to keep the firm maintenance of the computer. If you fail to do, then the internal hardware of the PC could malfunction and fail to respond when the system eventually goes through specific software changes. Routine Windows 10 update is one of such changes. After the update, there is a chance of the screen of the PC turning black, which would end up in you sitting with hands on your head.
Other than that, here are some of the different scenarios that could result in the system displaying a black or blank screen:
- Hardware issue with the wire enabling the screen display;
- "Display adapter" driver issue;
- The new Windows 10 update is not being fully installed.
In this section, we will present to you the best possible solutions to fix the black screen of death issue on your Windows 10 PC. Each of them would not take more than a minute to complete and have your PC's screen up and running again. Here are the solutions:
- 1. Try a Windows Key Sequence to Wake the Screen
- 2. Unplug Unnecessary USB Equipment
- 3. Update Your Graphics Card Driver
- 4. Uninstall Third-Party Windows Theming Software
- 5. Log in Using a Different User Account
- 6. Reset Your PC
With this method, you will enable to computer to refresh the computer screen. It will detect any issue with the display adapter and fix it immediately. Follow the instructions below to perform the solution:
- Once you see the black screen on the computer, do not restart it;
- Please press the Windows key + Ctrl + Shift + B simultaneously;
- Once you do that, you will hear a short beep sound, and the screen will immediately start to dim down;
- You will be able to see the desktop again in no time.
Sometimes after a full operating system update, the PC gets reset and cannot instantly detect outer hardware such as a USB or a wireless mouse. If the USB hardware is still attached to the computer after the update, it may prompt the PC to cause some graphics issues resulting in the black screen. It is wise to unplug all the USB equipment once you see the blank display and restart the computer. You are free to replug the external devices once the screen gets fixed.
Sometimes, the Windows 10 update does not instantly install the newer version of the graphics driver. If that happens, the screen of the PC could turn black consistently due to an incompatible or outdated graphics card drivers. However, it would take some unusual way to update the driver as you would not be able to view the screen and the content of the computer.
You can complete the job by restarting your computer and opening it under the Safe Mode with Networking environment. Here are the steps to update the driver in Safe Mode. To enter the Safe Mode, check out this post.
- Enter the Windows Diagnostics by pressing the power button repeatedly and choosing the "Advanced Option" and then click on "Startup Settings".
- Click on "Restart" and click the number 5 key from the keyboard;
- The number 5 key will enable the "Safe Mode with Networking".
- Click on "This PC" icon and click on "Properties."
- On the left side of the display, click on "Device Manager".
- Locate your Windows Graphic Card Driver under the option "Display Adapters" and right-click on it;
- Click on the "Update Driver" option and then click on "Search automatically for updated driver software".
- The interface will automatically detect the newest version of the graphics driver and install it.
- Click on "Close" after completing the update and restart the PC to use it in normal mode.
After a regular Windows 10 update, third-party apps may malfunction and struggle to adapt to the new settings. This sudden malfunctioning could result in the screen turning black and unusable. You would have to reaccess the Safe Mode to perform the activity and follows the steps stated below:
- Under the Safe Mode open the task manager from the Start menu;
- Under the menubar, click on "File" and click on "Run New Task."
- Enter "services.msc" on the newly opened dialogue box and proceed;
- Double click on "App Readiness" and you will see a new pop-up box;
- Click on the "Startup type" option and from the drop-down menu click on "Disabled" before proceeding forward;
- Click "OK" to save the newly established settings and restart your PC.
There may be some issue with your login credentials that could be becoming a party in the constant black screen on the computer. You would have to go under the Safe Mode to perform this solution as well, especially if the previous methods do not work. Here are the steps:
- Enable Safe Mode and access the desktop of the PC;
- Enter with your login and proceed to the next step;
- Open "This PC" and enter the following address on the address bar of the display:
C:\Users\Second Account Name\AppData\Local\Microsoft\Windows\Caches.
- Copy the newly opened folder and log in again using the old account;
- Access the same folder by entering the same address mentioned above;
- Paste the "Cache" folder and replace the old one;
- Restart the computer again to see if the screen is functioning appropriately or not.
If all the efforts fail to reap any reward, then the best thing you could try resetting the PC and see if it works or not. You would have to enable Safe Mode once again to perform the activity.
- Once you had entered the Safe Mode, enter "Reset from the search bar" and proceed to the next step;
- Click on "Get Started" under the Reset this PC option;
- Click on "Keep my files" and follow the instructions of the interface to complete the job.
By the way, you can also learn how to fix stuck at automatic repair black screen issue.
In most cases, the black screen issue after updating the Windows can be solved with the methods above mentioned. However, if you, unfortunately, failed to resolve the issue. You have to turn to a data recovery application to recover data on the computer. Recoverit Data Recovery software will be a decent choice. You can follow the below steps to achieve the aim.
Download | Win Download | Mac
- Recovering your precious data from an unbootable Windows 10 computer is very easy. All you need to do is download and install Recoverit. Open the program and then click on the data recovery mode. If your Windows 10 system becomes unbootable, then you need to tap on the 'Recover from Crash Computer mode.' On the following pop-up screen, tap on the 'Start' button to begin the recovery process.
- Click on the 'bootable drive mode' on the next window and enter a CD/DVD bootable drive or a USB bootable drive. Now, click on the 'Create' button.
- On the next pop-up window, the system will confirm whether you wish to format your USB drive completely. To confirm, you need to tap on the 'Format' button. It is recommended that you back your data up.
- A separate bootable drive will be created once you tap on the 'Format' button. It is advisable that you do not remove the USB flash drive in any circumstances. The program will then show you the following steps.
- After some time, a bootable drive will be created, after which you just need to follow three steps more to successfully recover your data.
- Before you start recovering your data from an unbootable Windows 10 system, the computer boot sequence needs to be changed and the boot from the new bootable media needs to be set.
- Next, simply restart your computer and keep tapping the F12 button to open the BIOS setup utility. Here, you need to enter your BIOS entry code. Since each system has its own BIOS entry key, you can read more about it: set computer to boot from USB drive.
- Once the entire booting system is done from the bootable drive, the Recoverit program will start automatically. From here on, recovering and copying your data from your unbootable Windows 10 program is quite simple. If you want to recover all your precious data from your unbootable system, all you need to do is follow this tutorial.
In this article, we had firmly discussed every possible way to solve the black screen of death crisis that generally occurs after a Windows 10 update. While all of the solutions mentioned above do not ask or require prior technical knowledge from a person, it is essential to take care of the computer and continuously check for warning signals. These signals could eventually result in hardware failure that could end you up with a black screen.
If any of the above solutions cause data loss on your PC, then you have the full power to get it all back within minutes with the assistance of Recoverit!
Download | Win Download | Mac
Computer Data Recovery
- Windows PE
- Repair Windows 10
- Create USB Boot Disk
- Fix Missing Operation System
- Create USB Boot Disk
- System problems
- Reset Windows 10
- Install Windows 10 on SSD
- Can't Enter Safe Mode
- Fix no Sound issue
- Parameter is Incorrect
- PC Errors
- Fix can’t Enter BIOS
- Not a Valid Win32 Application Error
- CD-ROM /DVD not working
- Delete Memory Dumps
- Connect an External Monitor
- Shift Key Not Working